Flashes Per Minute - SKF TKRS 21 Mode D'emploi

4.1 Flashes per minute

After the starting the instrument, the stroboscope is by default in the mode
"FPM" (lashes per minute).
Fig. 5 – Flashes per minute (FPM)
The lash rate can be changed by rotating the wheel (button 3).
To quicker ind the right lash rate, the rate of change can be inluenced by
A. Toggling the adjustment speed by pressing button 2.
B. the speed of rotating the wheel (button 3). Faster rotations have a faster
change rate, while slower rotations allow precise adjustments.
The change rate for fast adjustments can be customised in the settings.
12 EN
Adjust lashing rate by
scrolling the wheel
Scrolling speed can be
toggled between fast and slow
by pressing button 2