SKF TKRS 21 Mode D'emploi page 6

• Laser class 2
The SKF Stroboscope TKRS 31 is itted with a class 2 laser.
This is located at the front of the device.
The laser beam can damage eyes.
For this reason, do not stare directly at the laser beam and never direct it
at people or animals.
Wavelength: 650 nm, output: 1 mW.
C A U T I O N :
Flashing lights can cause retina damage!
• The SKF Stroboscope TKRS 31 is itted with 6 LEDs.
• The SKF Stroboscope TKRS 21 is itted with 7 LEDs.
These produce potentially dangerous optical radiation, which can cause
retina damage. Do not stare directly at the light and never direct it at
people or animals.
Warranty void!
• Do not expose the equipment to rough handling or heavy impacts.
• Always read and follow the operating instructions.
• Opening the housing of the instrument may result in hazardous
mishandling and voids warranty.
• The equipment should not be used in areas where there is a risk for
explosion.
• Do not expose the equipment to high humidity or direct contact with
water.
• All repair work should be performed by an SKF repair shop.
Correct disposal!
• =The electronic components in the device contain environmentally
harmful substances.
They must be disposed of in accordance with the environmental
regulations in the country of use.
N O T E :
• Suitable for use in residential, commercial and industrial area.
4 EN