Horizon Fitness ADVENTURE 3 Guide D'assemblage page 6

ASSEMBLY STEP 4
ADVENTURE 3 SHOWN
6
E
H
F
G
1
10
HZ14_AG_Adventure_3_5_r1_0.indd 10-11
HARDWARE FOR STEP 4
PART TYPE
E BOLT
F SPRING WASHER
G FLAT WASHER
H ARC WASHER
A Open HARDWARE FOR STEP 4.
7
B Gently place CONSOLE (5) on top of CONSOLE
MASTS (1 & 4).
4
NOTE: Be careful not to pinch the console
cables while attaching the console.
C Connect the CONSOLE CABLES (7) and ensure
they are tucked inside the CONSOLE (6).
D Connect the CONSOLE (6) to the right
CONSOLE MAST (4) using 2 BOLTS (E), 2
SPRING WASHERS (F) and 2 FLAT WASHERS
(G) from the inside of the mast and 1 BOLT (E),
1 SPRING WASHER (F) and 1 ARC WASHER
(H) from the front of the mast.
E Repeat STEP D on left side.
ASSEMBLY COMPLETE
QTY
6
6
Before the first use, lubricate the treadmill deck by following the
4 instructions in the MAINTENANCE section in the TREADMILL GUIDE.
2
11
7/21/14 10:20 AM