Problem Solving - Lumie Bodyclock STARTER 30 Notice D'utilisation

English
5 Problem-solving
Replacement bulbs are available from Lumie.
I ran a test sunrise but the light came up really quickly.
�
When setting a test alarm make sure you allow enough time for a full
sunrise – the default sunrise takes 30 minutes. For example, if the
actual time is 11:00 the alarm time must be set no earlier than 11:30,
otherwise the sunrise speeds up in order to finish on time.
The light will not come on but the clock still works.
�
Check to make sure the bulb is fully screwed into the socket. If this
doesn't work, try replacing the bulb.
Neither the clock nor the light works, or the clock is not doing what
�
I expect it to.
Turn off the power at the wall. Press and hold E as you turn the power
back on. This re-sets all the program options to their default state. If this
doesn't work, check the fuse in the plug.
Please call the Lumie Careline (01954 780500) if you have any
other problems.
www.lumie.com | 7