Language Selection; Cycle Selection; Cycles Standard Setup - Tecno-gaz Multisteril Fast Mode D'emploi

7.2

Language selection

Press STOP for 8 seconds.
The display shows the preset language.
Press SELECT to scroll available languages.
Press OK to confirm the selected language.
7.3

Cycle selection

Upon the appliance switch ON the manufacturer's logo is displayed together with the
firmware version.
After 3 seconds have elapsed the display shows:
Press SELECT to scroll programs.
Press START to start the selected cycle.
7.4

Cycles standard setup

The appliance comes with the following default parameters:
Standby
Detergent infeed
Heating
Degas function
SWEEP function
Ultrasound cleaning
Drying
Parameters can be modified for all cycles.
A B
ON OFF
1 % 1 %
ON OFF
SI SI
NO SI
20 min 20 min
SI SI
ENGLISH
C
OFF
1 %
ON
SI
NO
5 min
SI
15