Ribimex RIBILAND PREHLS52N Guide D'utilisation Et Manuel D'instructions page 31

Do not tow on open road.
Do not use the log splitter to transport persons/animals or objects.
Transporting the log splitter
When transporting in a vehicle, close the bleed screw to avoid any spillage, make sure to firmly
secure the machine with no parts protruding outside the vehicle to avoid a danger (e.g. fall, injury,
damage; ...)
4.7- Maximum pressure limiting device
The maximum pressure was set before the log splitter left the factory and the maximum pressure
limiting screw is sealed with glue to ensure the log splitter works under the set pressure.
No operator resetting is required.
Unauthorized resetting will cause the hydraulic pump to fail to output enough splitting pressure or
result in severe injury as well as damage to the machine.
Unauthorised intervention will void the guarantee.
V. OPERATION
5.1- Intended use
- The product is intended for domestic use (indoor or under shelter).
- The log splitter is only suitable for stationary operation.
- The log splitter is a machine intended to split firewood, in which the log is split through the pressure
of a slab against a wedge.
Only pre-cut logs should be split with the log splitter.
Logs must only be cut vertically in the direction of the grain. NEVER cut logs horizontally or
against the grain.
The splitter is solely intended for private use for DIY and home maintenance.
Metal parts (e.g. nails, wire, etc...) must be removed from the log wood.
Do not use the machine for purposes not appropriate (e.g. cutting products containing hazardous
materials ...), or for any use not described in this manual
The splitter is designed to be used by one person only.
Observe and follow applicable national or local work safety standards with machines related to
accident prevention and safety regulations.
The machine may only be used and maintained by persons who are familiar with it and who have
been informed about the dangers connected to it.
Unauthorized modifications to the machine release the manufacturer, the distributor and/or reseller
from any liability for any resulting damage or injury.
The machine must only be used and repaired with original accessories and tools available from the
manufacturer or your local reseller.
- Do not use the machine for any other use outside the scope of this manual.
- Any other use different from that indicated in these instructions is deemed improper and may cause
damage to the machine and present a danger to the user.
- DO NOT use nor mount on the machine accessories that are not recommended by the manufacturer.
- The product is not intended for artisanal, commercial, professional and/or industrial use.
- Do not use for applications not covered in this manual.
- The manufacturer or seller cannot be held responsible for incorrect or non-compliant use of machine.
- The user / operator will be held solely responsible. The manufacturer does NOT assume any liability
for any resulting damage or accident.
Page 31 / 59