Bosch 7 620 310 034 Mode D'emploi Et De Montage page 10

10 | en
f Repeatedly press the SET button until the
desired menu item appears:
Capture Logo for storing a custom
f
logo
Erase Logo for deleting the stored
f
logo
f Logo Timeout for setting how long the
logo is displayed
f Press the MENU button to select the
current menu item.
Note:
Select the Exit menu item to close the
customer logo menu.
Storing a custom logo
Notes:
It is possible to store an entire
f
CVBS image.
In the case of a VGA image, it is
f
only possible to store a cropped
section of it.
f The logo is stored with a color
depth of 16.7 million colors.
If the factory settings are
f
restored, the stored logo will still
be retained in memory.
f Firstly, take the necessary steps to display
the desired logo or image on the screen.
f In the customer logo menu, select the
Capture Logo menu item.
A query then appears asking you whether you
want to store the displayed image or the
displayed cropped section of the image.
7 620 310 034 | 09.2014
Note:
Press the – button to return to the
customer logo menu without storing
the logo.
f Press the + button.
The progress of the storing process is
displayed. As soon as the storing process has
completed, the current video source is
displayed.
Deleting a stored logo
Note:
After you delete a custom logo, the
Bosch logo will be displayed again.
f In the customer logo menu, select the
Erase Logo menu item.
The "Reset to Bosch Logo?" query is displayed.
Note:
Press the – button to return to the
customer logo menu without deleting
the current logo.
f Press the + button.
During the deletion process, the "Erasing Logo
in Progress" notification is displayed. After
approximately 3 seconds you will return to the
customer logo menu.
Setting the display duration
f In the customer logo menu, select the
Logo Timeout menu item.
Robert Bosch Car Multimedia GmbH
Menu settings