Maintenance; Problems And Solutions - Imetec E4501 Mode D'emploi

GB

MAINTENANCE

          
A special resin filter inside the water reservoir decreases the water hardness and limits the
formation of lime scale in the plate. The resin filter is permanent and cannot be replaced.
     
The function allows the internal part of the plate to be cleaned from lime scale residue or
other impurities.
It is recommended to implement this function every 5 - 10 times it is used.
Fill the water reservoir (11) up to the maximum (MAX) level (9).
Set the steam selector (5) to 0.
Adjust the temperature knob (2) to maximum and wait for the plate temperature control LED
(1) to go off.
Disconnect the plug (12) from the socket and immediately place the iron in a horizontal
position over a wash basin.
Press the Calc-Clean (8) button until hot water, steam and any impurities or lime scale come
out of the plate.
Once the iron plate has cooled down (10), clean it with a damp cloth.
CLEANING
ATTENTION!
·Á» ÉËÈ» ʾ» ÆÂ˽ ż ʾ» ·ÆÆ¿·Ä¹»
socket and the plate has cooled down completely before cleaning the
iron.
Any starch deposits or residue on the surface of the plate can be removed with a damp cloth
and non-abrasive liquid detergent.
Avoid scratching the plate with steel wool or metal objects.
The plastic parts can be cleaned with a damp cloth and then wiped with a dry cloth.

PROBLEMS AND SOLUTIONS

This chapter describes the most common problems related to appliance use. If the problems
cannot be resolved with the information below, please contact the Authorised Assistance
Centre.
18
      
¿É º¿É¹ÅÄÄ»¹Ê»º ¼ÈÅà ʾ»