Maintenance And Storage - Imetec P8401 Mode D'emploi

ZEROCALC ANTI-CALC SYSTEM
Replace the anti-scale filter (18) when the filter change indicator light (8) comes on and the iron emits
EN
a warning buzz.
Follow the instructions in the specific section INSERTING THE ANTI-SCALE FILTER.
NOTE: the electronic system modifies steam emission to safeguard the lifespan of the
product. The anti-scale filter (18) must be replaced as soon as possible.
Failure to replace the anti-scale filter (18) will invalidate the warranty.
Press and hold the filter change reset button (9) for at least second to confirm replacement until the
filter change indicator (8) and the steam ready indicator light (11) emit a light signal and an audible
signal.
Continue to use the iron.
CLEANING
WARNING! Make sure the plug of the appliance is disconnected
from the socket and the soleplate has cooled down completely
before cleaning the iron.
Position the ON/OFF switch (5) to turn the product OFF.
Unplug the power supply cable with plug (7) from the socket.
Wait until the iron cools down completely.
Remove any starch deposits or residue on the surface of the base of the iron (16) with a damp cloth
and non-abrasive liquid detergent.
Avoid scratching the base of the iron (16) with steel wool or metal objects.
Clean plastic parts with a damp cloth.
Then wipe with a dry cloth.
STORAGE
Fold the mono-tube in half (14) with the iron resting on its stand (12) [Fig. C].
Insert the folded mono-tube into the recess (4) sliding it inside the special clamp.
Slide the mono-tube (14) along the entire cable recess (4).
Insert the mono-tube (14) behind the second clamp [Fig. D].
WARNING! Risk of fire. Wait for the appliance to cool
completely before storing it.
17

MAINTENANCE AND STORAGE