Bort BSS-2400N Mode D'emploi page 10

Fault
The cleaner cannot operate.
The suction force is reduced.
There is abnormal sound when the motor
is under operation.
10
Treatment
1. Check whether the power plug is
inserted securely; pull out the plug and
then reinsert it in the power socket;
2. Check whether the power socket is
electrified;
3. Check whether the switch of the cleaner
is in "ON" position.
1. Check whether the floor brush, the hose
and the spile are jammed, and remove any
blockage immediately;
2. Check whether the air-inlet filter gauze
is dusty; frequently clean rubbish or
replace air-inlet and air-outlet HEPA;
1. Stop the cleaner immediately;
Check whether the floor brush, the hose
and the spile are jammed, and remove any
blockage immediately.