Step 2: Turning The Power On, And Setting The Date And Time - Sony Handycam DCR-SX45 Mode D'emploi

Step 2: Turning the power on, and setting the
date and time
1
Open the LCD screen of your camcorder.
Your camcorder is turned on and the lens cover is opened.
To turn on your camcorder when the LCD screen is open, press POWER.

2
Select the desired geographical area with
Touch the button on
the LCD screen.
To set the date and time again, touch

[GENERAL SET] category)  [CLOCK SET]. When an item is not on the screen, touch
(under
/ until the item appears.
3
Set [DST SET] or [SUMMERTIME], date and time, then touch
The clock starts.
If you set [DST SET] or [SUMMERTIME] to [ON], the clock advances 1 hour.

POWER button
(MENU)  [Show others]  [CLOCK/
MODE lamp
/ , then touch [NEXT].
LANG]
.
US
1