Panel Removal - Scotsman C1448 Manuel De L'utilisateur

Panel Removal

1 Locate and loosen the two screws at the front
edge of the top panel.
2 Pull the front panel out at the top until it clears
the top panel.
3 Lift the front panel up and off the machine.
4 Remove two screws at front edge of top
panel.
5 Lift up the front of the top panel, push it back
an inch, then lift to remove.
6 Locate and loosen the screw holding each
side panel to the base.
7 Pull the side panel forward to release it from
the back panel.
6
1
Switch Bezel
All models ship with the On and Off switches front
accessible. if desired, the On and Off switches can
be covered up to prevent unauthorized use by
changing the bezel in the front panel's trim strip. A
cover-up bezel ships loose with the machine.
To change bezels: Remove the front panel and
refer to the instruction label on the inside of the
front panel. Push snaps of the standard bezel in
and pull the bezel out of the front panel. Locate
other bezel. Push into trim strip from the front until
it snaps into place. Return the front panel to its
original position and secure it to the cabinet.
5
Panel Removal
November 2006
Page 5
C1448, C1848, C2148W
Air and Water Cooled User Manual
5