Setting And Starting A Washing Programme; Washing Programmes - Atag VA6311LT Notice D'utilisation

Setting and starting a washing programme

Starting the washing programme
without delay start
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. To set a washing programme, press the
programme button again and again until
the related programme indicator comes
on.
3. Close the appliance door, the washing
programme starts automatically.
Starting the washing programme with
delay start
1. Activate the appliance. Make sure that
the appliance is in setting mode.
2. Set the washing programme.
3. Press the delay start button. The delay
start indicator comes on.
4. Close the appliance door. The count-
down starts automatically.
• When the countdown is completed,
the washing programme starts auto-
matically. The delay start indicator
goes off.
The opening of the appliance door in-
terrupts the countdown. When you
close the door, the countdown contin-
ues from the point of interruption.
Cancelling the delay start
If the appliance door is open, and the
countdown has not started
1. Press the delay start button. The delay
start indicator goes off.
2. Start the washing programme.
If the appliance door is closed, and the
countdown operates
1. Open the appliance door.
2. Press the delay start button. The delay
start indicator goes off.
3. Close the appliance door. The washing
programme starts automatically.

Washing programmes

Programme Type of soil
Heavy soil Crockery, cutlery,
pots and pans
Interruption of a washing programme
• Open the appliance door.
– The washing programme stops.
• Close the appliance door.
– The washing programme continues
from the point of interruption.
Cancelling the washing programme
If the washing programme has not started,
you can change the selection.
To change the selection while a washing
programme operates, it is necessary to
cancel the programme.
1. Open the appliance door.
2. Press and hold the programme button
until the programme indicator goes off
and the end indicator starts to flash.
Make sure that there is detergent in the
detergent dispenser before you start a
new washing programme.
End of the washing programme
When the washing programme is comple-
ted, an intermittent acoustic signals
sounds.
1. Open the appliance door.
• The end indicator is on.
2. Deactivate the appliance.
For better drying results, keep the ap-
pliance door ajar for some minutes.
Remove the items from the baskets
• Let the dishes become cold before you
remove them from the appliance. Hot
dishes can be easily damaged.
• First remove the items from the lower
basket, then from the upper basket.
• There can be water on the sides and on
the door of the appliance. Stainless steel
becomes cool more quickly than the
dishes.
Type of load
Prewash
Wash 70 °C
Rinses
Dry
Programme description
29