Control Panel - Atag VA6311LT Notice D'utilisation

22

Control panel

The controls are on the top on the con-
trol panel. To operate with the controls,
keep the appliance door ajar.
1 On/off button
2 Programme indicators
3 Indicators
End indicator. It comes on in these conditions:
• When the washing programme is completed.
• When you adjust the level of the water softener.
• When you deactivate or activate the acoustic signals.
• When the appliance has a malfunction.
Rinse aid indicator. It comes on when it is necessary to fill the rinse aid dispens-
er.
Salt indicator. It comes on when it is necessary to fill the salt container.
After you fill the container, the salt indicator can stay on for some hours. This
does not have an unwanted effect on the operation of the appliance.
1) When the salt container is empty, the related indicator does not come on while a washing programme operates.
On/off button
Press this button to activate or deactivate
the appliance.
Programme indicators A and B
These indicators have also an auxiliary func-
tion when you:
• Adjust the level of the water softener.
• Activate or deactivate the acoustic sig-
nals.
Programme button
With this button you can:
• Set a washing programme.
• Adjust the level of the water softener.
• Activate or deactivate the acoustic sig-
nals.
• Cancel a washing programme in opera-
tion.
Delay start button
Press this button to delay the start of the
washing programme of three hours. Refer
to 'Setting and starting a washing pro-
gramme'.
1
Indicators
1)
A B 2
5 4
4 Programme button
5 Delay start button
Setting mode
The appliance must be in setting mode
for these operations:
• To set and start a washing programme.
• To adjust electronically the level of the
water softener.
• To deactivate or activate the acoustic
signals.
Activate the appliance. The appliance
is in setting mode when:
• All the programme indicators are off.
• The end indicator flashes.
Activate the appliance. The appliance
is not in setting mode when:
• Only one programme indicator comes
on.
– It is necessary to cancel the pro-
gramme to go back to the setting
mode. Refer to 'Setting and starting a
washing programme'.
3
1)