Geberit Sigma 80 Mode D'emploi page 13

Settings
With the Geberit WC flush control with Sigma80 actuator plate, specific settings can be made. The instructions can be
found on the following pages.
Overview
Setting
A Activate or deactivate
the cleaning function
B Select the colour of
the sensor lights
C Set the sensor
illumination
D Activate or deactivate
automatic flush
actuation
E Reset to factory
setting
With the Geberit WC flush control with Sigma80 actuator plate, further settings are possible. If you want to change any
of the settings in the following table, please consult a skilled person.
Skilled persons will find information on the settings at www.geberit.com.
Setting Description
Interval flush The WC flush control activates the flush at
regular time intervals.
Flush volume for The flush volume for a short flush can be set
short flush so that the optimum volume for the respective
WC ceramic appliance is obtained.
Detection time The minimum time for detecting a user within
the detection range can be changed (relevant
in the case of automatic flush actuation).
Cleaning time The time span during which the WC flush
control is inactive in the cleaning function can
be changed.
Sensor illumination The distance between the user and the
detection distance actuator plate at which the sensor illumination
is activated can be changed.
Description
The actuator plate and WC can be cleaned without triggering a flush.
The cleaning function can be activated and then deactivated following
completion of the cleaning process. The cleaning function is
automatically deactivated after 3 min.
The following colours can be selected:
Blue, turquoise, magenta, orange, yellow
Three different settings are possible.
1. The sensor illumination always remains off and does not come on
even when you approach the WC
2. The sensor illumination always remains on, even when you step
back from the WC and leave the room
3. The sensor illumination comes on as soon as you approach the WC
and goes off again when you step back
When the automatic flush actuation is activated, the WC flush control
always activates a long flush when you step back after use. Manual
actuation is not necessary.
Setting 1 = deactivated
Setting 2 = activated
Settings B, C and D are reset to the factory setting
Factory setting Remarks
Not active Adjustment range 1–168 h
Level 3 Adjustment range 5 levels
7 s Adjustment range 1–60 s
3 min Adjustment range 1–30 min
Level 3 Adjustment range 5 levels
Settings
DE
EN
FR
IT
Factory setting
–
NL
ES
Blue
PT
Setting 3
DK
NO
SE
FI
Setting 1
IS
PL
HU
–
SK
CZ
SL
HR
SR
EE
LV
LT
BG
RO
GR
TR
RU
AE
CN
JP
13