Key Function - Fracarro SIG9708CI Instructions D'emploi

To set the TPE language, enter the "TPE SETUP" --> "LANGUAGE" menu. Choose the language by
scrolling with the arrows and confirm with the
of device, when the TPE arrive to the number of receivers press
For other TPE settings, refer to the instruction sheet of the TPE programmer, or from page 6 to page
7. To enter the OSD (On Screen Display), enter the HEADEND SETUP -> OSD NAVIGATION and con-
firm it with the key.
IMPORTANT: Press the TPE
minutes from the last modifications, the set data will be lost.
NOTE: if, during programming, the word "Wait..." often appears (for example, while channels are
scrolled), decrease the TPE programmer TIMEOUT to  seconds instead of 0 sec. To carry out this
procedure, enter the "TPE SETUP" – "TIMEOUT COM" menu and set it to  (see page 14 for the TPE
SETUP menu).
In order to program and interpret the programming menu of the following flow-charts, refer to the fol-
lowing tables:
TPE keys
.....
Graphic indications of
the menu diagrams
key. (please wait a few seconds, TPE searching line
key to save the settings. If this key is not pressed within 5
Used to confirm an entered value or to select a menu
Used to cancel an entered value or exit a menu
Used to scroll the menu items
Used to enter values
Used to save the modifications
Select the menu by the
Scroll the menu to the right
Scroll the menu upwards
Scroll the value to the right
4
key).

Key Function

Meaning
or keys and exit with the
or to the left
or downwards
or to the left
key