Min/Max Value Buffer; Alarm Display - Hydrotechnik SEG 1060 Mode D'emploi

5.
6. –
7. –
8.
present for the set time before the alarm is triggered.
9. –
10. – leave configuration menu.
Application example
You want to supervise the temperature in a glasshouse with alarm limits
15° C and 50° C. You have to set:
= 50 (°C) /
5.3 Min-/max-value buffer
The instrument buffers the minimal and maximal values automatically. You
can display and delete them:
Display minimal value
–
Display maximal value
–
Delete min/max values
> 2 seconds –
5.4

Alarm display

The lights 7 and 6 are illuminated during a minimal value alarm. The lights
2 and 6 are illuminated during a maximal value alarm.
© Hydrotechnik GmbH • All rights reserved
set value when min-alarm shall be triggered
.
.
value of alarm delay in seconds; the alarm case must be
.
= 15 (°C)
– (2 seconds)
– (2 seconds)
21