Hydrotechnik SEG 1060 Mode D'emploi page 38

Connection of a transducer with
integrated supply and TTL -, NPN- or
Connection of a transducer with
integrated supply and NPN-output
with required external resistor
Connection note
R = 3 kOhm (at transducer supply = 12 V) or 7 kOhm (at 24 V); device
V
configuration: Sens = TTL.
Connection of a transducer with
integrated supply and PNP-output
with external resistor wiring
© Hydrotechnik GmbH • All rights reserved
PNP output
Connection of a transducer with
separate supply and TTL-, NPN- or
PNP-output
Connection of a transducer with
separate supply and NPN-output with
required external resistor
Connection of a transducer with
separate supply and PNP-output with
external resistor wiring
9