Important Safety Information; Introduction; Use As Agreed - Hydrotechnik SEG 1060 Mode D'emploi

SEG 1060
Instructions for use
1

Important Safety Information

Please take note of the Safety Advice and Warning Hints contained on the
information sheet (document no. L 8898-00-00.01) that is part of these
Instructions for Use and delivered with the device.
2

Introduction

This section contains information on various legal
all parts of this section in order to be fully aware of your rights.
2.1 Validity
The following Intructions for Use are valid for "SEG 1060" display,
monitoring and control equipment supplied by Hydrotechnik GmbH. They
are intended for the user of the equipment – that means, the person that
handles and works with the equipment.
This is not a technical handbook. Our Customer Service Dept. will be
pleased to answer any questions exceeding the contents of this manual.
2.2

Use as agreed

The "SEG 1060" is a universally applicable, microprocessor-controlled
display, monitoring and control device. It is equipped with a universal
input, as well as a switched and an analogue output. All the possible input
signals and switching functions are defined within the technical data.
Any application of this equipment which deviates from this definition and/
or the restrictions contained within the technical data, is not deemed to be
an "Use as agreed".
If you have questions, or wish to use the equipment for any other purpose,
please contact our Customer Service Dept.. We will be pleased to help you
with possible configurations.
2
questions. Please read
Version 1.2