Lubrication - Desoutter EAB15-900 Mode D'emploi

English
MAINTENANCE INSTRUCTIONS
When disposing of components,
lubricants, etc... ensure that the relevant
safety procedures are carried out.
Maintenance should be performed by qualified
personnel only.
● Prior to any maintenance task: unplug the
battery pack.
● When disassembling the tool electronics, take
extra care for the wires when pulling out the
connectors.
● Check that components are in good condition
and apply grease on mechanical parts
every 500,000 tightening cycles (standard
maintenance type)
Any repair on the electric motor, the resolver card
or the memory card shall be carried out in our
workshops or by trained and qualified personal.
● When disassembling the tool front assemblies,
take care for the torque transducer wires.
The use of spare parts other than those
originally supplied by the manufacturer
may result in a drop in performance or
in increased maintenance and level of
vibration and in the full cancellation of the
manufacturer's liability.

LUBRICATION

● Do not apply too much grease on
gears or bearings; a thin coat shall
be sufficient.
TOOLS
- No specific tools.
MEANING OF THE PICTOGRAMS
Left hand thread
When reassembling, apply the
recommended glue
When reassembling, tighten to the
required torque
When reassembling, lubricate with the
required grease or oil.
ASSEMBLY AND DISASSEMBLY
● Follow standard engineering practices and
refer to figures/exploded view for the mounting
of component subassemblies.
04/2014 04/2014
According to Directive 2002/96/
CE concerning Waste Electrical and
Electronic Equipment (WEEE), this
product must be recycled. Please
contact your "Customer Centre"
or consult the website "www.
desouttertools.com" to find out where
you can recycle this product.
DESOUTTER WARRANTY
1. This Desoutter product is warranted against
defective workmanship or materials, for a
maximum period of 12 months following the
date of purchase from Desoutter or its agents,
provided that its usage is limited to single shift
operation throughout that period. If the usage
rate exceeds that of single shift operation, the
warranty period shall be reduced on a prorata
basis.
2. If, during the warranty period, the product
appears to be defective in workmanship or
materials, it should be returned to Desoutter
or its agents, together with a short description
of the alleged defect. Desoutter shall, at its
sole discretion, arrange to repair or replace
free of charge such items as are deemed
faulty by reason of defective workmanship or
materials.
3. This warranty ceases to apply to products
which have been abused, misused or
modified, or which have been repaired using
other than genuine Desoutter spare parts
or by someone other than Desoutter or its
authorized service agents.
4. Should Desoutter incur any expense
correcting a defect resulting from abuse,
misuse, accidental damage or unauthorized
modification, they will require that such
expense shall be defrayed in full.
5. Desoutter accepts no claim for labour or other
expenditure made upon defective products.
6. Any direct, incidental or consequential
damages whatsoever arising from any defect
are expressly excluded.
7. This warranty is given in lieu of all other
warranties, or conditions, expressed or
implied, as to the quality, merchantability or
fitness for any particular purpose.
8. No one, whether an agent, servant or
employee of Desoutter, is authorized to add to
or modify the terms of this limited warranty in
any way.
31 / 108 31 / 108
6159930390_05