Use; Power Supply (Fig. E) - Tunturi FitCross 50i Manuel De L'utilisateur

English
• If you set a heart rate limit for your workout, an alarm will sound
when it is exceeded�
Heart rate measurement (heart rate chest belt)
‼ NOTE
• A chest strap does not come standard with this trainer. When you
like to use a wireless chest strap you need to purchase this as an
accessory�
The most accurate heart rate measurement is achieved with a heart
rate chest belt� The heart rate is measured by a heart rate receiver
in combination with a heart rate transmitter belt. Accurate heart
measurement requires that the electrodes on the transmitter belt are
slight moist and constantly touching the skin�
If the electrodes are too dry or too moist, the heart rate measurement
will become less accurate�
⚠ WARNING
• If you have a pacemaker, consult a physician before using a
heartrate chest belt�
⚠ CAUTION
• If there are several heart rate measurement devices next to each
other, make sure that the distance between them is at least 1�5
metres�
• If there is only one heart rate receiver and several heart rate
transmitters, make sure that only one person with a transmitter is
within transmission range�
‼ NOTE
• Do not use a heart rate chest belt in combination with the
handpulse sensors�
• Always wear the heart rate chest belt under your clothes directly in
contact with your skin� Do not wear the heart rate chest belt above
your clothes� If you wear the heart rate chest belt above your
clothes, there will be no signal�
• If you set a heart rate limit for your workout, an alarm will sound
when it is exceeded�
• The transmitter transmits the heart rate to the console up to a
distance of 1 metre� If the electrodes are not moist, the heart rate
will not appear on the display�
• Some fibers in clothes (e.g. polyester, poly-amide) create static
electricity which can prevent accurate heart rate measurement�
• Mobile phones, televisions and other electrical appliances create
an electromagnetic field which can prevent accurate heart rate
measurement�
Maximum heart rate (during training)
The maximum heart rate is the highest heart rate a person can safely
achieve through exercise stress� The following formula is used to
calculate the average maximum heart rate: 220 - AGE. The maximum
heart rate varies from person to person�
⚠ WARNING
• Make sure that you do not exceed your maximum heart rate
during your workout� If you belong to a risk group, consult a
physician�
Beginner 50-60% of maximum heart rate
Suitable for beginners, weight-watchers, convalescents and persons
who have not exercised for a long time� Exercise at least three times a
week, 30 minutes at a time�
Advanced 60-70% of maximum heart rate
Suitable for persons who want to improve and maintain fitness� Exercise
at least three times a week, 30 minutes at a time�
Expert 70-80% of maximum heart rate
Suitable for the fittest of persons who are used to long-endurance
workouts�

Use

Adjusting the support feet
The equipment is equipped with 4 support feet� If the equipment is not
stable, the support feet can be adjusted�
- Turn the support feet as required to put the equipment in a stable
position�
- Tighten the locknuts to lock the support feet�
‼ NOTE
• The machine is the most stable when all support feet are turned
fully in� Therefore start to level the machine by turning all support
feet fully in, before turning out the required support feet to stable
the machine�
Adjusting the pedal position
The both pedals can be adjusted according to the height and the
exercise position of the user�
- Loosen the 2 pedal fixing knobs�
- Move the pedal to the required position�
- Tighten the pedal fixing knobs�
‼ NOTE
• Make sure the both pedals are fitted into similar positions always�
Adjusting the console
The console can be adjusted according to the height and the exercise
position of the user�
- Loosen the console adjustment knob�
- Move the console to the required position�
- Tighten the console adjustment knob�

Power supply (Fig. E)

The trainer is powered by an external power supply� Refer to the
illustration to locate the trainer power input�
‼ NOTE
• Connect the power supply with the trainer before connecting it to
the wall outlet�
• Always remove power cord when
• machine is not in use�
2 2