Publicité
Les langues disponibles
Les langues disponibles
DE
GB
INTRODUCTION
FR
It is compulsory to read this instruction manual before starting any
kind of action.
NL
The proper operation and full compliance of this product's
performance is guaranteed only if all the instructions provided in this
ES
manual are closely adhered to.
We guarantee that this product complies with the technical
IT
specifications described in this manual.
The manufacturer shall not be held responsible for any improper
uses other than those described herein.
PT
Use protective work gloves, protective footwear, hard hat and safety
goggles.
PL
Misuse:
DA
-
This product should only be used as described in this
documentation; any other use is considered improper.
EL
-
The manufacturer accepts no responsibility for any
damage caused by the incorrect or unreasonable use of
the equipment.
-
Moreover, misuse shall also void the warranty.
Take care of your tools:
-
Be sure to store your tools in a clean state.
-
Place the tools inside their original package.
This assortment allows the controlled and correct expansion of joints.
Damage to components such as cast iron or aluminium is minimized
(wear of materials/breakage).
Very helpful in the removal and assembly of shock absorbers, ball
and load-bearing joints, male shafts, etc.
Different working widths and depths are covered thanks to a total of
7 expansion wedges.
Aplicaciones
Single cross member: universally applicable on all motor vehicles
Double cross member: VW 4-arm axle
10
METHOD OF PREPARATION
1
Removal of load-bearing joints
2
Removal of shock absorbers
3
Steering column universal joint
4
VW 4-arm upper axle
Publicité
