Maxi-Cosi FamilyFix One i-Size Mode D'emploi page 20

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 24
EN
FamilyFix One i-Size base
A
Anchor points for securing seat
B
Storage compartment for manual
C
ISOFIX connectors
D
ISOFIX connectors release button
E
Battery compartment
F
Release button for support leg
G
Support leg
H
Seat release button
I
Indicator panel
J
ISOFIX connectors indicator
K
Support leg indicator
L
Indicator car seat locked in position
M
Battery voltage indicator
N
Installation test button
O
Warning switch off front passenger airbag
P
Safety
FamilyFix One i-Size general instructions
1. The FamilyFix One i-Size is for car use only.
2. The FamilyFix One i-Size may only be used with
the car seats on the orange ECE sticker at the
bottom of the product.
3. You are personally responsible for the safety of
your child at all times.
4. Never leave your child unattended.
5. Do not use second-hand products whose history
is unknown. Some parts could be broken, torn or
missing.
6. Replace the FamilyFix One i-Size when it has been
22
subject of violent stresses in an accident:
the safety of your child can no longer be
guaranteed.
7. Please read this instruction manual carefully and
keep it for future reference.
8. Use only original parts approved by the
manufacturer.
WARNING :
Do not make any changes to the
FamilyFix One i-Size, as this could result in dangerous
situations.
FamilyFix One i-Size car use
1. The FamilyFix One i-Size is an ISOFIX system.
2. It is only suitable for use in cars equipped with
ISOFIX anchor points. For more information,
check your car owner's manual.
3. Check to make sure your car is listed on the
approved car fitting list.
4. Before buying the FamilyFix One i-Size, check to
make sure it fits properly in your car.
5. Check whether the fold-down rear seats are
locked into position.
6. Unfold the FamilyFix One i-Size support leg
completely and place it in the most forward
position (green LED indicator).
7. Press the test button to check a proper
installation of the product. When one of the LED
indicators is red, repeat the installation steps until
all LED indicators are green.
8. Make sure all luggage and other objects are
secured.

Publicité

Table des Matières
loading

Table des Matières