Storage For Prolonged Periods Without Operation; Description Of Symbols - Viking MA 443 Manuel D'utilisation

new component, ensure that the new
component is provided with the same
stickers.
Regularly check that the mowing blade is
securely fastened and is not damaged or
worn.
Only perform work on the cutting unit when
wearing thick work gloves and exercising
extreme care.
Ensure that all nuts, pins and screws (in
particular the blade fastening screw) are
securely tightened so that the machine is
in a safe operating condition.
Check the complete machine and the
grass catcher box for wear or damage on
a regular basis, particularly before
extended periods when the machine is not
in use (e.g. over winter). For safety
reasons, worn or damaged parts must be
replaced immediately to ensure that the
machine is always in a safe operating
condition.
Components or guards that are removed
for maintenance operations must be
properly reinstalled immediately.
4.9 Storage for prolonged periods
without operation
Store the cooled machine, the battery and
the safety plug safely in a dry and locked
room that is inaccessible to children.
Ensure that the machine is protected from
unauthorised use (e.g. by children).
Thoroughly clean the machine before
storage (e.g. winter break).
Store the machine in good operational
condition.
40
4.10 Disposal
Ensure that old machines are properly
disposed of. Render the machine
unusable prior to disposal. In order to
prevent accidents, ensure that you remove
the safety plug and the electric cable from
the motor.
Risk of injury due to the cutting tool!
Always store an old machine in a safe
place prior to scrapping. Ensure that the
machine and the cutting tool are kept out
of the reach of children.
Batteries must be disposed of separately
from the machine. Ensure that batteries
are discharged prior to disposal (e.g. by
running the motor) and that they are
disposed of safely and in an
environmentally-friendly manner.

5. Description of symbols

Caution!
Read the instruction man-
ual before initial use.
Risk of injury!
Keep other persons out of
the danger area.
Caution –
sharp cutting blades!
The cutting blades run on
after the motor has been
switched off. Remove the
locking device (safety plug)
before performing mainte-
nance work.
MA 443:
Switch on the motor.
MA 443 C:
Switch on the motor.
MA 443 C:
Switch off the motor.
Remove the locking device
(safety plug) before perform-
ing any work on the
machine.
Battery is too warm.
Charging starts after the
cooling-down period, i.e.
the battery can only be
used after the cooling-
down period.
The battery is defective
and must be replaced.
0478 131 9922 D - EN