Table Des Matières; Symbols; General Safety Instructions - Festool CXS Guide D'utilisation

Contents
Symbols ...............................................
Safety instructions...............................
Technical data......................................
Functional description.........................
Intended use ........................................
Operation .............................................
Settings................................................
Tool holder, attachments.....................
Working with the machine...................
Service and maintenance ....................
Accessories..........................................
Environment ........................................
Transport .............................................
Warranty ..............................................

Symbols

V volts
A amperes
Hz hertz
~ alternating current
a.c.
direct current
d.c.
n no load speed
0

General safety instructions

WARNING! Read all safety warnings and all
instructions. Failure to follow the warnings
and instructions may result in electric shock, fire
and/or serious injury.
Save all warnings and instructions for future ref-
erence.
The term "power tool" in the warnings refers to
your mains-operated (corded) power tool or bat-
tery-operated (cordless) power tool.
1 WORK AREA SAFETY
a. Keep work area clean and well lit. Cluttered and
dark areas invite accidents.
b. Do not operate power tools in explosive atmo-
6
Class II construction
rpm revolutions per minute
6
-1
min
6
'' inch
9
lb. pound
9
diameter
9
hint, tipp
10
12
Warning of general danger
12
Risk of electric shock
14
15
Read the Operating Instructions/Notes!
15
16
Warning of general danger
17
17
Risk of electric shock
Read the Operating Instructions/Notes!
Wear ear protection.
Wear protective gloves.
Max. chuck clamping
RBRC Seal - LiIon
Safety instructions
spheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
c. Keep children and bystanders away while oper-
ating a power tool. Distractions can cause you to
lose control.
2 ELECTRICAL SAFETY
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodified plugs and matching outlets
will reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of elec-