Installation; Prior To Installation - Jotul F 130 Série Manuel D'installation Et D'utilisation

ENGLISH

4.0 Installation

• Before installing the fi replace, check it carefully for any
signs of damage.
• The product is heavy! Ask someone to help you when
positioning and installing it.
• Make sure that furniture and other household items
are at a safe distance from the fi replace to protect
them from drying out.
• Do not place anything on the top plate of the stove as this
could cause permanent damage to the paint/enamel.

4.1 Prior to installation

• When the product is unpacked, take out the ash pan and its
contents, the fi re grate, burn plates, baffl e plates, exhaust
defl ector and the cover plate for the external air supply
before the stove is being used for the fi rst time.
4.1 Preparations - Jøtul F 134 / F 135
with base
Fig. 3
A
A
B
1. Remove the four transport screws (A) that fasten the stove
to the wooden pallet.
2. Leave the stove standing on the transport pallet.
3. Remove the gloves from the ash pan.
4. Remove the baffl e, inner bottom plate, and bag of screws
from the burn chamber.
5. Check that the control levers (B) move easily.
12
A
A
Fig. 4
A
A
B
B
B
6. Fit the height adjustment screws (A) together with plastic
caps (B) which are in the bag of screws. NB: If using the
glass fl oor plate option, the stove must be raised approx.
8 mm off the fl oor to allow the fl oor plate to be slid under
the front edge of the base.
7. Lift the stove off the pallet.
8. Perform a trial installation of the stove, using the 4 height
adjustment screws to ensure it is horizontal.
9. Mark on the wall if there are to be rear vents for the fl ue
pipe and/or outside air supply. NB: Make allowance for the
height of the fl oor plate.
A
A
B
B