ENGLISH
4.5 Fitting a fl ue pipe with a rear outlet
The product is supplied from the factory with the smoke outlet
fi tted for the top outlet. To use the rear outlet, proceed as
follows
Fig. 19
1. Remove the four screws (A).
Fig. 20
2. Unhook the rear plate (B).
18
A
A
B
Fig. 21
A
3. Knock out the cover (A) with a hammer.
Fig. 22
4. Lift off the inner rear plate (A).
5. Then clip out the cover at the four points shown (B).
B
B
B
A