HT HT64 Manuel D'utilisation page 50

Recalling measured data (snapshots) on the display
Fig. 19: Recalling measured data (snapshots) on the display
31. Use the F2 or F3 key to select symbol
side).
32. Use the F2 (PREV) or F3 (NEXT) key to select and view the desired measure among
the ones saved in the instrument's memory (see Fig. 19
reference appears at the bottom of the display on the right side.
33. Press the F1 (DELETE) key to delete the selected measure or the F4 (CLOSE) key to
go back to main screen
Recalling recordings to the display
34. Use the F2 or F3 key to select symbol
side).
35. Use the F2 (PREV) or F3 (NEXT) key to select the desired recording among the ones
saved in the instrument's memory (see Fig. 20
appears at the bottom of the display.
36. Press the F1 (TREND) key to display the trend of recording.
37. Press the F3 (>>) key to move the cursor on the graph and observe the corresponding
value at the bottom of the display.
38. Press the F2 (+) key to activate (if available) the zooming function of the graph.
39. Press the F1 (DELETE) key to delete the selected recording or the F4 (BACK) key to
go back to the previous screen.
"
Fig. 20: Recalling recordings to the display
"
EN - 15
View M and press the F1 key (see Fig. 19
"
View R and press the F1 key (see Fig. 20
"
central part). The recording reference
–
right side). The measure
–
HT64
left
–
left
–