HT HT64 Manuel D'utilisation page 49

General settings of the instrument
25. The instrument shows the following information:
 Firmware version  internal Firmware version
 Free memory  percentage values of the remaining free space in the memory for
saving snapshots (SAVE), recordings (REC) and graphs (GRAPH).
26. Press the F4 key to go back to the previous screen
Recalling graphs to the display
27. Use the F2 or F3 key to select symbol
side).
28. Use the F2 (PREV) or F3 (NEXT) keys to select the desired graph among the ones
saved in the instrument's memory and press key F1 (ENTER) to open the graph (see
Fig. 18 central part).
–
29. Use the F2 (<<) or F3 (>>) keys to move the cursor within the graph in the two
directions, observing the corresponding value at the bottom of the display (see Fig. 18
right side).
–
30. Press the F1 (DELETE) key to delete the selected graph or the F4 (BACK) key to go
back to the previous screen.
Instrument Info
–
Fig. 17: Display of Menu Instrument Info
Fig. 18: Recalling graphs to the display
View G
"
EN - 14
and press the F1 key (see Fig. 18
"
HT64
left
–