Relative Measurement; Saving Min/Max/Average And Peak Values - HT HT64 Manuel D'utilisation

4.3.4. Relative measurement

1. Press and hold the HOLD/REL key to enter relative measurement (see Fig. 5
side). The message
2. Press the F4 key to enter the General menu, save the measured result and display it
(see § 4.3.7).

4.3.5. Saving MIN/MAX/AVERAGE and PEAK values

1. Press the F4 key to enter the measuring mode of MAX, MIN and Average values of the
quantity to be measured (see Fig. 6
on the display.
2. The values are automatically updated by the instrument, which emits a short beep
whenever the actually displayed values are exceeded (higher for MAX value, lower for
MIN value).
3. Press the F2 key to stop detecting the values and the F1 key to start measuring again.
4. Press the F3 key to save the measured result (see Fig. 6
(see § 4.3.7).
5. Press the F4 key to enter the measuring mode of Peak values of the quantity to be
measured (see Fig. 7
the values are updated in the same way as for the MAX/MIN function.
6. Press the F2 key to stop detecting the values and the F1 key to start measuring again.
7. Press the F3 key to save the result and display it (see § 4.3.7).
Fig. 5: Relative measurement
REL and symbol
" " "
Fig. 6: Saving MIN/MAX/AVERAGE values
–
Fig. 7: Saving PEAK values
right side). The message
–
EN - 9

appear on the display.
"
central part). The message
PEAK
"
MAX MIN
"
right side) and display it
–
appears on the display and
"
HT64
right
–
appears
"