HT HT64 Manuel D'utilisation page 46

4. Use the F2 or F3 key to select:
 Setting of recording duration, from 1min to 23h:59min
 Setting of sampling interval from 1s to 59min:59s
5. Press the F1 key to enable the editing functions and the F2 (+) and F3 (>>) keys to
carry out the desired settings.
6. Press the F1 (OK) key to confirm the settings or the F4 (CANCEL) key to go back to
editing (see Fig. 10
7. Press the key F4 (CLOSE) to go back to the main screen
8. Select the option
on the display
9. The instrument shows the remaining time and the number of samples taken in real
time, and the message
the F4 (STOP) key to stop recording at any time.
10. Press the F2 key to save recorded data in the internal memory and view it again on the
display
11. Press the F3 (TREND) key to display the trend of recording (see Fig. 11
12. Press the F4 (>>) key to move the cursor on the graph and the F2 (+) key to activate
the Zoom function of the graph, increasing resolution (symbol
dimension appears at the top of the display on the right side) (see Fig. 11
You can zoom X1 for at least 15 measuring points, X2 for at least 30 measuring
points, X3 for at least 60 measuring points and so on for maximum 6 zooming
operations.
13. Press the F4 (BACK) key to go back to the previous screen.
Deleting the instrument
14. Use the F2 or F3 key to select symbol
side).
right side).
–
Start Recording and press the F1 key. The following screen appears
" "
Fig. 11: Starting data recording
Stopped at the end of recording (see Fig. 11
" "
s memory
'
Fig. 12: Deleting the internal memory
Delete and press the F1 key (see Fig. 12
" "
EN - 11
left side). Press
–
central part).
–
Xy where y=max zoom
" "
right side).
–
HT64
left
–