HT HT64 Manuel D'utilisation page 47

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

15. Use the F2 or F3 key to select the options:
 Delete all Measurements  all snapshots (measurements) are deleted
 Delete all Recordings  all recordings are deleted
 Delete all Graphs  all graphs are deleted.
16. Press the F1 (OK) key to carry out the selected operation (a confirmation message is
shown by the instrument).
General settings of the instrument
17. Use the F2 or F3 key to select symbol
side).
18. Use the F2 or F3 key to select the options:
 Reset  restores the instrument
 Format  allows activating the key tone, setting the format of date/time and of the
displayed numbers (decimal comma or point).
 General  allows setting the system
interval, the background colour and the display
the system
s language.
'
 Meter Info  provides information on the internal Firmware version and on the
memory
s available space.
'
19. Press the F1 (ENTER) key to carry out the selected operation or the F4 (CANCEL) key
to go back to the measuring screen.
General settings of the instrument
20. Press the F1 (OK) key to activate the Reset.
21. The Reset operation do not deletes the instrument
Fig. 13: General settings of the instrument
s default conditions.
'
Reset
Fig. 14: Activating the instrument
EN - 12
Setup
and press the F1 key (see Fig. 13
"
"
s date/time, defining the Auto Power OFF
'
s font colour and type, and choosing
'
s reset
'
s internal memory
'
HT64
left

Publicité

Table des Matières
loading

Table des Matières