Dometic DA20E Notice D'utilisation page 40

Operating the awning
➤ Double-check that the awning is fully retracted before starting your
journey. The front cover should rest closely alongside the housing.
A
NOTICE! Beware of damage
If the awning is retracted when wet, extend it again at the next
opportunity and let the fabric dry out. If the wet fabric stays rolled
up for a long time it becomes mildewed and can stain.
6.4 Testing the wind sensor
!
WARNING!
The wind sensor is a safety-related part. Malfunctioning of the
wind sensor can lead to fatality or serious injury, as well as
serious damage to your vehicle.
Test the wind sensor before each journey and at regular
intervals.
Do not change any settings on the wind sensor. A change in the
default settings can cause the wind sensor to malfunction and
lead to fatality and serious injury, as well as serious damage to
your vehicle.
I
NOTE
Any change made to the default setting will invalidate the warranty.
To test the wind sensor, proceed as follows:
➤ Briefly press the
✓ The awning extends all the way.
➤ Move the front cover (fig. 4 1, page 2) for about 8 seconds approx. 75 to
100 mm repeatedly back and forth to simulate vibrations from the wind.
✓ The awning retracts automatically all the way.
40
button.
DA20E
EN