Mounting The Inverter; Tools Required - Dometic MSI912 Instructions De Montage Et De Service

SinePower
MSI1800TOE
The inverter has the following connections, displays and control elements on the
front:
No. in
fig. 8,
Label
page 5
1 Main switch
"ON/OFF/REMOTE"
2 "Input Level" LED
3 "Load Level" LED
4 Dip switch
5 AC input
6 AC output
7 Fuse
8 Earthing screw
8

Mounting the inverter

8.1

Tools required

For the electrical connection you will need the following tools:
• Crimping tool
• 3 multi-coloured, flexible connection cables. You can see the required cross
section for cable lugs and conductor sleeves in the table in the chapter "Connect-
ing the inverter" on page 21.
• Cable lugs and conductor sleeves.
For fastening the inverter you will require the following tools:
• Machine bolts (M4) with washers and self-locking nuts or
• self-tapping screws or wood screws.
EN
Description
Switches the device on, off or to operation via the
remote control (accessory)
Displays the input voltage range
Displays the power being supplied
Makes settings on the inverter (such as mains voltage,
mains frequency, energy-saving mode).
230 V input
230 V output
Protects the inverter from overload.
The fuse can be pressed in again once it has trig-
gered.
Sets or removes the grounding bridge
Mounting the inverter
19