Remote Control; Fitting The Inverter; Tools Required - Dometic SINEPOWER DSP 612 Instructions De Montage

Fitting the inverter

6.2 Connections
I
NOTE
The version for continental Europe is depicted.
No. in
Description
fig. 2
4 AC outlet
5 Remote control connection
6 DC connection
7 Ground terminal (Earthing on the vehicle bodywork)
8 Fan
6.3

Remote control

No. in
Description
fig. 3
1 On/off button
2 Status LED
3 Terminal for remote control
7 Fitting the inverter
7.1

Tools required

For the electrical connection you will need the following tools:
• Crimping tool
• 3multi-coloured, flexible connection cables. Determine the necessary thickness
from the table in chapter "Connecting the inverter" on page 12.
• Cable lugs and conductor sleeves
For fastening you will require the following tools:
• Machine bolts (M4) with washers and self-locking nuts or
• self-tapping screws or wood screws
10
SinePower
EN