Limited Warranty; Technical Specifications - Angelcare AC315 Manuel De L'utilisateur

Masquer les pouces Voir aussi pour AC315:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
THE PARENT UNIT SCREEN IS BLACK (PARENT UNIT IS OFF)
• Turn the Parent Unit back ON by pushing and holding the POWER ON/OFF button for 2 seconds.
• Recharge the Parent Unit.
FALSE ALARMS
• Turn OFF the Camera.
• Verify the connection between the Sensor Pad and the Camera. Unplug and reconnect the cord.
• Make sure there is no bedding between the mattress and the Sensor Pad.
• If the cot has a spring or slat base, place a hardboard between the cot base and the Sensor Pad
measuring at least 33 cm x 33 cm x 6 mm thick.
• Make sure the Sensor Pad is positioned as described under the setup requirements. Sensitivity
may need to be adjusted. Refer to STEP 5.1 for more information.
ALARM WILL NOT SOUND
• Avoid contact with the cot when the monitor is ON.
• Place cot near a solid supporting wall to avoid Sensor Pad from detecting movement from outside the cot.
• You may need to decrease the sensitivity. Refer to STEP 5.1 for more information.
THE PARENT UNIT DOESN'T SHOW MOVEMENT AND TEMPERATURE REPORTS
• Make sure the time and date is set up. Refers to STEP 4.1 & 4.2.
• Make sure the movement and temperature function is activated. Refers to STEP 6.5.

LIMITED WARRANTY

Angelcare
®
warrants to the original owner of this product that Angelcare
monitor is free from any material and workmanship defects for the term of the
warranty period (see warranty table below to determine the warranty for your
country). If this monitoring system fails to function properly when used as
directed under normal conditions and during the warranty period, Angelcare
will either repair or replace the product, at our discretion, free of charge. Please
contact your local distributor to validate warranty and warranty period.
The product must be accompanied by a proof of purchase, either a bill of
sale or other proof that the monitoring system is within the warranty period.
Angelcare
will bear the cost of repairing or replacing the product and
®
shipping it back to you.
This warranty does not apply to a product which has been damaged as a
result of improper maintenance, an accident, improper voltage supply or
any other form of misuse. The warranty is also void if the owner repairs or
modifies the product in any way. Angelcare
or consequential damages with regard to this product. The warranty also
excludes any liability other than what is stated above. No other warranty
is given.

TECHNICAL SPECIFICATIONS

Range:
Open field (Open area without obstructions):
up to 250 metres.
Number of Channels:
USA/Canada: 24 channels.
Europe: 24 channels.
Power Supply:
1 included rechargeable Li‑Ion battery (Parent Unit)
100 ‑ 240 VAC / 5 VDC adapter for the Parent Unit
100 ‑ 240 VAC / 5 VDC adapter for the Camera
Caution: To reduce the risk of electric shock, do not expose this product to
rain or moisture.
Danger of explosion if batteries are incorrectly replaced. The battery
included for the Parent Unit is a user replaceable Li‑ion rechargeable
battery, manufactured by manufatured by Icon Energy System (Shenzhen)
Co Ltd. Only use the Angelcare recommended replacement battery. To
obtain information on replacement batteries please contact Angelcare
customer service: www.angelcarebaby.com or contact your local distributor.
Instructions will be included with the replacement battery. Keep all batteries
away from children.
78
241AC_10_AC315_EU2_M2.indd 78
This warranty does not cover products and accessories which are not
Angelcare‑branded, or any problems that result from usage that is not
®
in accordance with product instructions, failure to follow the product
instructions, or problems caused by using accessories, parts or components
not supplied by Angelcare.
®
LEGAL RIGHTS VARY FROM COUNTRY TO COUNTRY. SOME COUNTRIES
DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS MAY NOT
APPLY TO YOU.
WE ARE NOT IN ANY WAY RESPONSIBLE FOR ANY OUTCOME RESULTING
FROM THE USE OF THIS PRODUCT.
IMPORTANT! This Angelcare
do not return this product to the store. If you have questions or need help,
please call your distributor before returning this product.
®
is not liable for any incidental
WARRANTY TERM PER COUNTRY
North America
UK, South Africa, Russia
Other countries
Battery:
• CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED
BY AN INCORRECT TYPE
Transmission:
Transmission between the Parent Unit and the
Camera is made on 2.4 GHz frequency for Europe/Asia/Africa/Australia.
Asia/Africa/Australia
Maximum RF Power Transmitted:
• 20dBm (100mW) between Camera and Parent Unit
Hereby, Angelcare Monitors Inc., declares that this Baby Monitor is in
compliance with Directive 2014/53/EU The full text of the EU declaration of
conformity is available at the following internet address:
www.angelcarebaby.com/declaration‑of‑conformity
ErP Compliance
USE ONLY THE FOLLOWING ANGELCARE
MODEL NUMBERS:
EU (INCLUDIG GERMANY) – MODEL NUMBER: K05S050100G
UK – MODEL NUMBER: K05S050100B
®
monitor is a personal care product. Please
®
PROTECT THE ENVIRONMENT
The wheelie bin symbols mean that according to local laws and
regulations your product and/or its battery shall be disposed of
separately from household waste. When the product/battery reaches its
end of life take it to a collection point designated by local authorities.
The seperate disposal and recycling will help conserve natural resources
and protect human health and the environment. Refer to User's Guide for
removal of batteries
1 year
1 year
2 years
BRAND POWER SUPPLY
2018-02-26 1:34 PM

Publicité

Table des Matières
loading

Table des Matières