Angelcare AC315 Manuel De L'utilisateur page 75

TO ACTIVATE OR DEACTIVATE MOVEMENT AND TEMPERATURE MONITORING:
IMPORTANT
In order to record the movement and temperature data, ensure you have set the date
and time in STEPS 4.1 and 4.2.
The graphing function is not available during the first 20 minutes of use as the system is
collecting the first set of data that will be displayed. During this time, the graphing icon
will not be operational.
02:04 18°C
02:04
02:04 18°C
3
DELETE GRAPHING DATA:
This option will not be available until 20 minutes from activation of this function.
02:04 18°C
02:04
02:04 18°C
NAVIGATING MOVEMENT AND TEMPERATURE REPORTS:
18°C
241AC_10_AC315_EU2_M2.indd 75
1) In the general settings menu, select the monitoring
settings.
2) Press OK to select monitoring ON or OFF toggle.
3) Press the down arrow
highlighted in blue then Press the
settings.
1) In the general settings menu, select the graph delete
menu.
2) Press the down arrow
previously saved graph data.
1) In the movement & temperature reports, press
highlight/select the first set of arrows. Use the up/down
arrows
to navigate page by page.
, the Save icon at the bottom is
button to save the
and then to delete
E
N
to
75
2018-02-26 1:34 PM