Room Temperature Display - Angelcare AC315 Manuel De L'utilisateur

6.3 ‑ ROOM TEMPERATURE DISPLAY
TO ACTIVATE THE ROOM TEMPERATURE ALERT:
18°C
18°C
17 30
TO SET THE ROOM TEMPERATURE RANGE:
18°C
18°C
30
17
TO ACTIVATE/DEACTIVATE THE CAMERA TEMPERATURE DISPLAY AND COLOR
CHANGING MODE:
Allows you to set the LCD display on your Camera. You can completely turn OFF the
display, or set the color temperature color display on the Camera. With this option
the Camera digits light up in colour when the temperature goes above or below your
preferences. The Camera LCD will turn to red if temperature is too hot, blue if too cold and
white if correct.
18°C
18°C
241AC_10_AC315_EU2_M2.indd 73
1) In the temperature settings menu, select the alarm settings
by pressing
2) Press to switch the temperature alarm ON/OFF.
3) Press the down arrow
bottom is highlighted in blue then Press the
3
to save the settings.
1) In the temperature settings menu, select the alarm settings
by pressing
2) Set the lower temperature limit with the up/down
arrows
upper limit and confirm with
3) Press the down arrow
3
highlighted in blue then Press the
settings.
1) In the temperature settings menu, select the Camera
LCD display setting menu.
2) Press
to turn the LCD display mode activate/
deactivate then press the down arrow
to turn the colour changing mode activate/deactivate.
3) Press the down arrow
is highlighted in blue then Press the
3
the settings.
.
until the Save icon at the
.
and confirm with . Do the same for the
.
, the Save icon at the bottom is
, the Save icon at the bottom
E
N
button
button to save the
once and then
button to save
73
2018-02-26 1:34 PM