Vr2 Dual Control Unit - Zippie Salsa M2 Mini Manuel D'utilisation

Actuator button and LEDs:
Depending on whether your wheelchair is fitted with one
or two actuators the operation of this button will differ.
Wheelchairs with one actuator
Depressing the actuator button will enter actuator
adjustment mode. This will be indicated by the illumination
of both actuator LED's. Actuator adjustment can then be
made by deflecting the joystick forwards or backwards. To
re enter drive mode, depress either actuator button
Wheelchairs with two actuators
Depressing the actuator button will enter actuator
adjustment mode. Depressing the button once illuminates
the left LED, and deflection of the joystick will adjust
the actuator motor connected to that channel. If the
right button is depressed the associated LED will be
illuminated, and deflection of the joystick will adjust the
actuator motor connected to the other channel.
To re enter drive mode, depress the selected actuator
button, as indicated by the associated LED
It is also possible to select the other actuator by left or
right movements of the joystick
R-net Control
Please refer to your R-net Owner's Manual for
details.

7.3 VR2 Dual control unit

Control button and indicator:
This shows which joystick has control. If the red
wheelchair light is on the wheelchair occupants joystick
has control. If the green attendant light is on the dual
attendant systems joystick has control. The button is used
to transfer control between the two choices
Actuator button and LED:
All VR2 dual attendant systems have an actuator button
fitted as standard.
NOTE: If the VR2 is programmed with no actuators then
this button has no function.
42
ZIPPIE SALSA M Mini
2
Wheelchairs with one actuator:
Depressing the actuator button once will enter actuator
adjustment mode. This will be indicated by the illumination
of both actuator LED's. Actuator adjustment can then be
made by deflecting the joystick forwards and backwards.
To re enter drive mode, depress either the actuator button
or the speed button
Wheelchairs with two actuators:
Depressing the actuator button will enter actuator
adjustment mode. Depressing the button once illuminates
the left LED and deflection of the joystick forwards
or backwards will adjust the actuator connected to
that channel. Selection between the two actuators is
achieved by deflecting the joystick to the left and right.
As the actuator selected changes so will the LED which
illuminates. Left for actuator 1 and right for actuator 2
To re enter drive mode, depress either the actuator
buttonor the speed button
Maximum speed button and indicator:
This shows the maximum speed setting for the
when the dual attendant system has control. There are
five settings - setting 1 is the slowest speed and setting 5
is the highest speed. The speed setting is changed with
the speed button.
NOTE: If the control system is programmed for drive
profile operation, then the dual attendant system speed
adjuster will only adjust the speed within the selected
profile.
NOTE: Changing between drive profiles can only be
achieved using the VR2
R-net Control
Please refer to your R-net Owner's Manual for
details.
wheelchair
Rev.C