Seating; Firm Seat Board (Fig 6.1); Seat Cushions; Removable Seat Covers - Zippie Salsa M2 Mini Manuel D'utilisation

6.0 Seating

6.1 Firm seat board (Fig 6.1)

The areas defined by labels on the seatplate can be used
to help fit a third party seating system.
In the base plate, drill holes (max. Ø 7mm) with a
minimum gap of 20mm should be positioned in the small
area (Fig. 6.2) or in the large area (Fig 6.3).

6.2 Seat cushions

Seat cushions supplied by Sunrise Medical will have
Velcro® strips that correspond to patches on the seat,
(Fig.6.3).
WARNING!
You must ensure these are aligned prior to using the
wheelchair . Other cushions used should also have
Velcro® strips in a similar position to ensure the cushion
does not slip off the seat.
NOTE: The seat cushions, supplied by Sunrise Medical all
have removable covers.

6.3 Removable seat covers

The seat covers are all fully removable using zips or
Velcro Once brackets are removed seat covers can be
®.
removed. The zip for the backrest is located on the under-
side of the cushion.
30
ZIPPIE SALSA M Mini
2
Fig.6.1
Fig.6.2
Fig.6.3
Rev.C