Zippie Salsa M2 Mini Manuel D'utilisation page 26

5.8.4 Standard Arm pad Position Adjustment
To Adjust the Arm Pad Depth:
1. Using a 5.0 mm Allen Key, (Hexagon Wrench),
remove the two arm pad adjustment screws (C).
(Fig.5.23).
2. Remove arm pad and place upside down on a
suitable work surface. (Fig.5.24)
3. Loosen screws (A and B). Slide arm pad forward or
backward as required. Retighten screws (A and B).
Use 5 Nm or 44 in/lb of torque.
4. Place armpad back onto armrest.
Retighten both adjustment screws (C).
Use 10 Nm or 88.5 in/lb of torque, (Fig.5.23).
WARNING!
Ensure screws are fully tightened prior to use, especially
when transporting your wheelchair .
CAUTION!
Please check that the new arm rest position does not
interfere with any seat positioning settings.
26
ZIPPIE SALSA M Mini
2
C
Fig. 5.23
Fig. 5.24
Rev.C