Powering The Case Fans; Installing The Front I/O Connectors; Frequently Asked Questions - Corsair CARBIDE Série Guide D'installation

SPEC-01

9. Powering the Case Fans

After locating your 3 or 4
pin fan headers on your
motherboard (see your
motherboard's manual for fan
header locations), plug in the
included fan cable.

10. Installing the Front I/O Connectors

See your motherboard's
manual for front panel header
locations and pin-outs.
USB 3.0
USB 2.0
9
POWER SW HDD LED POWER LED –
HD AUDIO RESET SW
POWER LED +

Frequently Asked Questions

1. How do I remove the I/O Panel ?
If needed, you can uninstall your I/O panel by removing the front
fascia (step 5) then unscrewing the 2 screws at each side of
panel. (drawing)
2. Does the polarity matter with the I/O panel's power and reset
header?
No, only the LED headers.
3. Who should I contact if I received my case damaged or one of the
fans is no longer working?
Please go to corsair.force.com and request an RMA
so that we can replace the damaged part(s).
4. Where can I mount a fan?
Fan Mount Locations
Front x2 120mm or x2 140mm
Top x2 120mm
Rear
Bottom
Side
Mid
To learn more about this case visit the product page at corsair.com
120mm
x
x
x
10