PERFECTPRO cubi Mode D'emploi page 16

Operating your radio – Manual tuning
1. Press the STANDBY button to switch on your radio.
2. Press the SOURCE button to select FM band and stand up the
rubber antenna properly to get best FM reception.
3. Rotate the Tuning control knob to tune required frequency in the
increment of 50 kHz.
4. Select required EQ and stereo / mono mode.
5. A stereo symbol will appear on the LCD display if a stereo
broadcasting station is found.
6. Rotate the Volume control knob to get required sound level.
7. To turn off the radio, press the STANDBY button. Display will
show local time only.
15