Restart Bluetooth Pairing; Aux In Mode - PERFECTPRO ROCKBOX Manuel De L'utilisateur

Restart Bluetooth pairing

The Bluetooth function can be set to operate in different ways as below:
1. In Bluetooth mode, press the Menu button to enter the system setting.
2. Rotate the Tuning knob to select the "Disconnect BT" option, and press the
Tuning knob to select the setting.
3. The LCD display will show "Not connected" and the radio's Bluetooth is free for any
mobile phone device connection as it is in discoverable mode now.
Note: "Disconnect BT" is the option that forces the Bluetooth of this radio to disconnect
from your mobile phone and enter the "discoverable mode". This is the way to allow
the Bluetooth pairing to another device. If no new device is paired, the Bluetooth will
automatically try to connect to the last device when it is switched off and on again.
The Auto-Power management function will be activated in Bluetooth mode. If there is no
signal* for a period of over 15 minutes, the radio will automatically
switch to standby mode. Pressing the On/Off button will wake up the unit.

AUX IN MODE

A 3.5mm stereo Aux In socket is provided on the side behind the rubber cover, for
connecting an external audio device such as MP3 player or CD player (not included with
this radio).
1. Connect an audio source to the Aux In socket.
2. Press the Source button to select AUX input. Display will show "AUX IN".
3. Play the external player.
4. Adjust the volume of both the radio and the player for comfortable listening.
5. After use, close the rubber cover to prevent moist or dust from entering into the
sockets and radio.
Notes: Never use the AUX-IN socket in rainy or moist conditions to prevent moist from
entering the radio. Keep the rubber cover closed under these conditions.
The Auto-Power management function will be activated in AUX mode. If there is no
signal from the AUX input jack for a period over 15 minutes, the unit will automatically
switch to standby mode. The operation indicator and the LCD will go off in such case.
Pressing the On/Standby button will wake up the unit.
15