Replacing Lighting - Faber LEVANTE G Instructions D'installation

REPLACING LIGHTING

35 W halogen Type GU10 bulb
1
Remove the bulb (See the picture).
Replace the bulb with a new one of
2
the same type, making sure that you
insert the two pins properly into the
housings on the lamp holder and
twist to lock back in place.
Attention: The bulbs could be hot,
please wait some minutes before the
replacing.
Attention: It's possible to upgrade the GU10
halogen with GU10 LED Max 5.5 W.
Check the reference in a picture.
Gu10 self-ballasted led
lamps – listed in accor-
dance with ul
1993/nmx-j-
578/1-ance/
csa c22.2 No.
1993
31