Replacing Lighting - Faber LEVE24SS200 Instructions D'installation

REPLACING LIGHTING

Suggested replacement with a type A15 incandescent bulb, E26, 40 watts
Before attempting to replace the
1
lights, make sure that the light
switch is turned off.
Remove the light cover by pressing
2
side prongs are released. Lift the
light cover and slide it toward you in
one motion.
Unscrew light counterclockwise to
3
unlock light and pull out. Replace
with new light of same type
(standard incandescent), making
sure socket is properly inserted into
the housing of the lamp holder.
Attention: The bulbs could be hot,
please wait some minutes before
the replacing.
To replace the light cover, insert
4
the prong located at the end of
the cover into the top opening.
Gently push the cover up and
prongs into the side openings.
Release and the cover will lock
into position.
30
Light cover
!
CAUTION –
RISK OF FIRE,
MAX 60 W
TYPE A19 LAMP