Tools Needed - Faber LEVANTE G Instructions D'installation

PARTS (cont.)
PARTS NEEDED
PART
7" Round Metal Ductwork
3 1/4" x 10" Rectangular Ductwork
7" Damper
Wire connectors.
Power Supply Cable.
Drywall plugs or other suitable wall fasteners based on
your installation.
Wall Cap/Roof Cap Needs to be purchased separately

TOOLS NEEDED

TOOL
Tape Measure
Pencil
Electric Drill with 5/16" Drill Bit
Phillips Screwdriver
Torx Screwdriver
Pozi Screwdriver
-
9