Ducted - 3 1/4" X 10" Rectangular Outlet Rear - Faber LEVANTE G Instructions D'installation

DUCTED - 3 1/4" X 10" RECTANGULAR OUTLET
REAR
Use the rear air outlet and cut where indicated.
1
2
Install the included rectangular air outlet with two screws
Connect the metal ductwork to the Roof or Wall Cap purchased separately and
3
then attach ductwork.
F
Torx Screws (1/8" x 3/8")
Torx Screwdriver
3 " x 10"
1/4
Rear
Caution: If an elbow is required,
do it as far away from the
hood's exhaust opening as
possible.
Rear
.
F
Go to page 20
19