Cumulative Error Floating Option; External Stop Option (Pilot Contact) - Fronius Selectiva Plus E Instructions De Service

The cumulative error floating option can
Cumulative error
floating option be used to control a PLC for example. The
NO contact opens automatically whenever
a fault (ERROR) is detected, including
Error 12 „phase failure"
(1) Charger
(2) Example, connection to PLC
External stop Opening connection X 6/2 and X 6/5
option (pilot interrupts charging.
contact)
(1) Charger
X 6/2 (brown)
X 6/5 (blue)
„WARNING!" Socket/plug X6
is only suitable for protective
low voltage signals of max. 42V
AC/DC/4A. Higher voltages
may lead to destruction of the
device or present an electrical
hazard.
9
(1) X 6/3
X 6/6
4 A T
Fig.5 Cumulative error floating max. 42V
AC/DC/4A
(1)
X 6/2
X 6/5
Fig.6 External stop wiring diagram
(2)
SPS