Procedure for loading a favourite programme
• Press the
for the selection menu to appear.
• Press the
display.
O
F1
F2
• Press the
STROBO
P 1/8
touch display.
F3
F4
• Press the
the touch display..
SAVE
LOAD
The settings are loaded from the selected
memory location.
k
204
D
button as often as it takes
sensor button on the touch
LOAD
sensor button on the
F1
F4
. . .
sensor button on
13 Flash techniques
13.1 Bounce flash
Bounce flash illuminates the subject more
softly and reduces dense shadows. It also
reduces the drop in light from foreground to
background that occurs for physical reasons.
The reflector of the flash unit can be swivel-
led horizontally and tilted vertically for
bounce flash.
Tilting the reflector
• Press the release button
reflector from the lock while turning it to
the desired position.
+
The reflector is locked only in the normal
position .
To avoid colour cast in your shots, the reflec-
tive surface should be colour-neutral or
white.
When tilting the reflector vertically, make
sure that it is turned through an angle that is
wide enough to prevent direct light from fal-
ling on the subject. For this reason the reflec-
tor should be tilted at least as far as the 60°
lock-in position.
When the reflector head is tilted, the reflector
is moved to a position of 70 mm in order to
prevent the subject from being additionally
illuminated by dispersed light .
The range and position of the reflector is not
displayed.
and remove the